VG Belgium TE300 Series
Technical Data
- abrasive belt and/or brush standard with the feed
- component thickness: max. 200 mm
- speeds conveyor belt : 5 and 10 m/min., high quality non-slip feed belt
- the spirally grooved contact roller (70°SH v = 20 m/sec or 40°SH, v = 10 m/sec)for more effective cooling and longer abrasive life
- the electrical switch board:
– main switch with minimal and emergency stop
– therm.-magnet. safeties for the motors
– hand served switches
- rubber pressure rollers in front and after each unit min. component length type
K (roller Ø 122): 190 mm (T-300)
B (brush Ø 200): 250 mm
TB (top brush 4 x Ø 163 mm): 250 mm
- machines for shorter sanding lengths are also available
- simple adjustment
- colours RAL 7024 + 7035
- machine delivered without abrasive belt and/or brush
Version
Type | Motor PK | Weight kg |
---|---|---|
TE-300-K/ZO | 7.5 + 0.7 | 600 |
TE-300-2K/ZO | (2×7.5) +0.7 | 800 |
Options
- TE04. abrasive belt against the feed instead of with the feed (only 1 direction is possible)
- TE05. contact roller 40° SH instead of 70° SH + speed abrasive belt 10 m/sec instead of 20 m/sec
- TE06. contact roller Ø 102 instead of 122 (min. component length: 160 mm)
- TE07. ammeter for the main motors per unit
- TE08. two speed pulley for abrasive belt motor 7,5 KW speed abrasive belt 10+20m/sec
- TE10. variable speed abrasive belt motor 7,5 KW
- TE12. automatic star/delta starters per motor
- TE20. B: brush unit – with the feed – motor 5,5 KW T-301 spindle Ø 50-brush max. Ø200 mm (brush not incl.) speed 1900 rpm
- TE21. 2B: 2 brush units – with the feed T-300 (brushes not included)
- TE22. brush unit against the feed instead of with the feed
- TE23. brush unit with and against the feed
- TE25. TB: top brush unit for T-300 with 4 oscillating top brushes Ø163 (top brushes not included) n = 1500 rpm – motors 4 x 0,55 KW + 0,18 KW max. brush width 280mm – conveyor belt 2,5 &5 m/min instead of 5 & 10 m/min.
- TE26. 2TB: 2 top brush units for T-300 (top brushes not included)
- TE30. thickness meter, reading up to 0.1 mm/mechanical
- TE31. thickness meter, reading up to 0.1 mm/electronic
- TE32. height-adjustment by means of a motor (0,18KW) + optional T31incl.
- TE33.1. variable speed conveyor belt 3-10 m/min. (for all machines with contact roller (K) and brush (B))
- TE33.2. variable speed conveyor belt 2-6 m/min. (for all machines with top brushes (TB))
- TE34. magnetic through feed table and adjusted conveyor belt T-300/EUR
1 UNIT 3.595,00
2 UNITS 3.775,00
3 UNITS 4.070,00
4 UNITS 6.115,00
5 UNITS 6.945,00 - TE35. cleaning brush conveyor belt (mounted bottom side) cleaning brush Ø 180 mm included, motor 0,18 KW – extractor outlet Ø 80
- TE36. flat conveyor belt
- TE40. boarding conveyor belt in other colour then RAL 7024(graphite-grey)
- TE41.machine painted in other colour then RAL 7035 (grey-white)