VG Belgium C Series Deburring & Finishing
Technical Data
- Perfect grinding surface with the ‘Compact Turbogrinder’
- Easy to operate
- Works much faster & smoother than small portable machines or long belt machines
- K: grinding unit
+ the spirally grooved contact roller (70° SH, v = 20 m/sec or 40° SH, v = 10 m/sec optional C05) for more effective cooling and longer abrasive life
+ mechanical abrasive belt tension
+ with the feed
+ motor 3 KW
+ abrasive belt sizes: 150 mm x 1900 mm
+ min. component length (roller Ø 122): 190 mm
- B: brush unit
+ spindle diam. 50 – 1500 RPM
+ max. size of brush 200 mm x 150 mm wide
+ with the feed
+ motor 3 KW
+ min. component length brush: 240 mm
- Rubber pressure rollers in front and after each unit
- Component thickness: 0,5 mm-200 mm
- High quality, non-slip feed belt, speed 5&10 m/min–motor0,55/0,75KW
- The electrical switch board is supplied with the following:
– main switch with minima and emergency stop
– thermic magnetic security on all motors
– manual switches
- Machine can also be supplied:
– in width 200 mm and 300 mm
– with stainless steel bodywork and paper belt filter for the wet grinding
Version
Type | Grind Unit | Brush Unit | Weight kg |
---|---|---|---|
C-150-K | 1 | - | 400 |
C-150-K/B | 1 | 1 | 480 |
C-150-K/2B | 1 | 2 | 650 |
C-150-2K | 2 | - | 520 |
C-150-2K/B | 2 | 1 | 730 |
C-150-2K/2B | 2 | 2 | 760 |
C-150-3K | 3 | - | 720 |
C-150-3K/B | 3 | 1 | 800 |
C-150-4K | 3 | - | 840 |
Options
- C01. pneumatic belt oscillation
- C02. pneumatic belt tension
- C03. compressed air safety device
- C04. abrasive belt against the feed instead of with the feed
(only 1 direction is possible) - C05. contact roller 40° SH instead of 70° SH + speed abrasive belt
10 m/sec instead of 20 m/sec - C06. contact roller Ø 102 instead of 122
(min. component length: 160 mm) - C07. ammeter for the main motors
- C08. 2-speed motor 3 KW for abrasive belt (10 + 20 m/sec)
- C09. variable speed abrasive belt or brush 3 KW
- C12. automatic starter
- C19. floating head
- C22. brush unit against the feed instead of with the feed
- C23. brush unit with and against the feed
- C30. thickness meter, reading up to 0,1 mm/mechanical
- C31. thickness meter, reading up to 0,1 mm/electronic
- C32. height-adjustment by means of a motor (0,25KW)+ optional C31 included
- C33.1.variable speed conveyor belt 3-10 m/min.
(for all machines with contact roller (K) and brush (B)) - C33.2. variable speed conveyor belt 2-6 m/min.
(for all machines with top brushes (TB)) - OPTIONS: C – Series
- C34. magnetic through feed table and adjusted conveyor belt
- C36. flat conveyor belt
- C40. boarding conveyor belt painted in other colour then RAL 7024
(graphite-grey) - C41. machine painted in other colour then RAL 7035 (grey-white)